Sign Up to our mailing list

The Voice of Canada’s growing pellet sector
  • Video: Heating with Wood Pellets

    Heating with wood pellets is an effective way to help in the fight against climate change.

  • Video: Wood Pellet Association of Canada

    Existing coal plants can be cost-effectively repurposed to use wood pellet fuel to help the environment and reduce air pollution.

  • Pellets

    Made from renewable forest byproducts and unmerchantable material, wood pellets from Canada provide a renewable, sustainable fuel source for generations to enjoy. | Read More

  • Sustainable

    Only 9% of the world’s forest are certified. Over 42% of them are in Canada, making it an ideal source for sustainable wood pellets. | Read More

  • Renewable

    WPAC members rely on sawmill waste and forest harvest residuals for the bulk of their fibre supply, allowing 100% resource use. | Read More

  • Fossil Fuel Alternative

    Whether on their own or co-fired with coal, wood pellets provide a lower carbon footprint and renewable energy source. | Read More

  • Innovative

    WPAC continues to support R&D in key wood pellet areas like safety, efficiency, fuel stability, energy content and more. | Read More

WPAC Dust Safety Week photo
Raw material storage at wood pellet plant. Photo courtesy WPAC.

Combustible wood dust in confined storage could present a risk of fire and explosion if it’s not managed effectively. The Wood Pellet Association of Canada (WPAC) has developed tools to improve safety and lower the risk when working around wood fibre storage.

In 2017, the Wood Pellet Association of Canada (WPAC)’s Safety Committee, in collaboration with the BC Forest Safety Council (BCFSC), the Manufacturing Advisory Group and WorkSafeBC, established a Working Group to lead the process on developing best practices for combustible dust management in wood fibre storage. This collaboration resulted in the formation of the Wood Fibre Storage Working Group (WFSWG), with the overall objective of improving safety within the wood manufacturing sector by eliminating injuries and fatalities.

The objectives were to:
  • Assist employers in understanding and assessing the hazards of storing and handling wood fibre in areas intended for storage and infeed processes.
  • Provide guidance on developing and implementing risk mitigation strategies and preferred operating practices, including training of workers and supervisors.
  • Provide direction on potential audit elements or standards for fibre storage to be incorporated into the WPAC/BCFSC Combustible Dust Audit; and
  • Consult with WorkSafeBC on inspection and compliance requirements related to the storage of wood fibre in buildings and structures intended for that purpose.
After consulting with WorkSafeBC and following their recommendations for industry programs on combustible wood dust inspection and management, the working group developed guidelines for the management of both wood fibre storage and combustible dust, which includes documents on risks and mitigation and gap analysis, as well as a safety bulletin.

The risk and mitigation document lists the potential ignition sources and highlights leading/best mitigation options when working in and around wood fibre, with a focus on storage buildings/structures, mobile equipment, luminaries, electrical distribution equipment, conveyors, and bins.

The gap analysis tool was developed to help employers assess the potential hazards, identify gaps in their safety management system and implement control measures to mitigate risk. It includes a list of 12 components for safety management system requirements for storage infrastructure, storage building luminaries, electrical distribution equipment, infeed process, fibre delivery/acquisition, mobile equipment and inspections, cleaning and maintenance. It also provides such requirements for safety management: roles and responsibilities, documentation – identification and maintenance of applicable regulations, training, awareness and competence, emergency preparedness and response, performance measurement, management review, and communications.

Finally, the safety bulletin covers the main considerations in fire prevention and best practices when managing wood fibre with mobile equipment to ensure the risk of fire or deflagration is effectively addressed:

  • It is critical to ensure properly trained personnel operate mobile equipment.
  • All mobile equipment should be inspected and cleaned regularly.
  • Ensure automatic extinguishing systems are installed on engine and hydraulic components. It is recommended to inspect the general condition of the extinguishing system at least weekly; inspect the dry chemical for free flow capability at least monthly; and establish a quarterly maintenance program that includes checking for free movement of the actuator mechanism.
  • To reduce the risk of sparks and fire, protected wiring, air operated starting and enclosed batteries are highly recommended.
  • Water cooled manifold and muffler are strongly recommended to bring down the surface temperature and thus reduce fire risk.
  • Mobile equipment should never be left unattended or parked in storage areas.
  • Reversing engine fan can help minimizing wood dust/fibre accumulation within the engine compartment.
  • It is recommended to have additional extinguishers available on the mobile equipment and within the storage area.
  • Coating or insulation on turbos are recommended to reduce surface temperatures and thus the risk of fire.
  • Interlocks on hydraulic systems are recommended as they allow the flow of hydraulic fluid to be stopped effectively in the event of a leak and thus reduce the risk of fire.

For more information, contact:

Fahimeh Yazdan Panah
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Tel: (778) 990 -2656

Or visit

Industry Links

Industry Links



Become a Member

Become a Member


WPAC Safety Committee

To find more information about the WPAC Safety Committee and safety resources, please click here

Power Generation


Sustainable power

The vast majority of Canadian wood pellets are made from sawmill residuals - sawdust. The rest are made from the residuals from harvesting operations for sawmills and pulp mills, or low-grade timber from forest industry harvest sites that has no other economic value. Think firewood. Read more...

Breathing easier - pellet emissions vs coal

Sustainability should be top of mind for any company that wants to stay in the game in today’s world.

As important a role as Greenhouse Gas (GHG) emissions play, we also need to focus on noxious emissions versus coal.


Industry News


  • Mark your calendars! New pellet safety webinar series coming soon

    Safety is the foundation of our pellet industry. Our work around safety never ends; we are constantly striving for new ways to improve safety whether it be the equipment we use or the processes that support good, safe decision making.[…]

  • The role RNG is playing in transitioning Canada toward a carbon-negative future

    The cost to produce renewable natural gas (RNG) is higher than that of conventional natural gas, but a number of factors are helping to reduce the gap. Incentives, regulatory action and innovations introduced by utilities have contributed toward shrinking the[…]


The Pellet Advantage

Efficient and Plentiful Production

Wood Pellet Association of Canada members are world leaders in the design and operation of modern pellet plants.


Innovating our way to a safer, better product

Wood pellets are a safe, reliable modern fuel. But they are still a fuel, requiring care in producing, shipping and storing.


Renewable and sustainable? Energy really can grow on trees.

There is no single energy source capable of solving our dependence on fossil fuels. Instead we need to look to a mix of new fuels, including wood pellets.


Argus Wood Pellet Index

US$ per metric tonneArgus Wood Pellet Index

We are using cookies to give you the best experience on our website. By continuing to use the site, you agree to the use of cookies. To find out more, read our Privacy Policy.