Sign Up to our mailing list

The Voice of Canada’s growing pellet sector
  • Video: Heating with Wood Pellets

    Heating with wood pellets is an effective way to help in the fight against climate change.

  • Video: Wood Pellet Association of Canada

    Existing coal plants can be cost-effectively repurposed to use wood pellet fuel to help the environment and reduce air pollution.

  • Pellets

    Made from renewable forest byproducts and unmerchantable material, wood pellets from Canada provide a renewable, sustainable fuel source for generations to enjoy. | Read More

  • Sustainable

    Only 9% of the world’s forest are certified. Over 42% of them are in Canada, making it an ideal source for sustainable wood pellets. | Read More

  • Renewable

    WPAC members rely on sawmill waste and forest harvest residuals for the bulk of their fibre supply, allowing 100% resource use. | Read More

  • Fossil Fuel Alternative

    Whether on their own or co-fired with coal, wood pellets provide a lower carbon footprint and renewable energy source. | Read More

  • Innovative

    WPAC continues to support R&D in key wood pellet areas like safety, efficiency, fuel stability, energy content and more. | Read More

Jan. 17, 2018 - Two important developments took place in Europe today in the U.K. and at the European Parliament.

First, the U.K. government's Renewables Obligation Consultation results were announced, and as a result Drax announced plans to convert a fourth boiler to biomass.

On Sept. 15, the U.K. Department of Energy Business and Industrial Development (BEIS) published a consultation on controlling the cost of biomass conversions and biomass co-firing. BEIS proposed two alternatives: (1) controlling the cost of support for biomass under the Renewable Obligation (RO) scheme through a cap on the amount of renewable obligation certificates (ROCs) which could be earned for ‘non-grandfathered’ units accredited under the RO scheme, and (2) cutting support levels for ‘non-grandfathered’ units.

On Jan. 17, BEIS published a report containing the consultation results. The government has decided to implement an amended version of the generator cap. Rather than imposing a cap on ROC support for any future biomass unit conversions, a cap will be applied at the power station level across all ROC units. This will protect existing converted units and limit the amount of incremental ROCs attributable to additional unit conversions to 125,000 per year.

This has resulted in some fantastic news from Drax. On Jan. 17, the very same day as BEIS released its report, Drax has announced that it will convert a fourth unit to biomass during the second half of 2018, and the company expects the unit to be operational by the end of the year.

Drax's biomass-fired units 2 and 3 have grandfathered RO subsidies, while its biomass-fired unit 1 operates under the contracts for difference subsidy scheme. Unit 4 is RO accredited but is not grandfathered under the scheme, so the cap will apply. Drax tested biomass at unit 4 for much of last summer.

The unit is likely to operate at lower availability than the three existing 645-MW biomass units, but the intention is to run it at periods of high demand.

Second, the European Parliament voted in on January 17 and delivered its position on the final versions of both the Renewable Energy (REDII) and the Energy Efficiency (EED) Directives. This concludes a first but crucially important stage of the European legislative process. These adopted proposals will now proceed to inter-institutional negotiations (also known as trilogues) before effectively becoming legally binding from 2021 to 2030.

The following is a summary of the main decisions:

REDII
  • Targets: the target for renewable for 2030 is set at 35 per cent, binding at EU level.
  • Biomass resources: Efforts by a coalition of Greens and S&D, aimed at banning roundwood and stumps for energy were rejected (albeit by a relatively narrow margin).
  • Non-competition of uses (26.1): The attempt by the ENVI committee to add new criteria related to the waste hierarchy and the non-distortion of market was mitigated. However, the non-competition of uses issue was strengthened in other articles (namely those dealing with support schemes).
  • Land-based criteria (26.5): The risk based approach (RBA) was adopted and improved, thus streamlining the compliance process for forest managers. This paves the way for acceptance of SBP certification post 2020.
  • Green-House-Gas (GHG) Criteria (26.7): The criteria requiring GHG emission reductions, compared to fossil fuels, are set with the following progressive targets: 70 per cent reduction for installations starting operation after Jan. 1, 2021 and 80 per cent for installations starting operation after Jan. 1, 2026. AEBIOM was advocating for a slightly lower target of 70 per cent, while the council (whose position will have to be aligned to the parliament’s) opted for 70 per cent and 75 per cent respectively.
  • Biopower (26.8): Concerning biomass to electricity (i.e. biopower): an energy efficiency requirement of 40 per cent has been set for power-only installations. In addition, these installations are now required to run exclusively on biomass. This would only apply to installations starting operations after three years of the adoption of the directive (presumably in 2021). AEBIOM advocated for compliance to existing legislation, requiring a slightly lower energy efficiency of 38 per cent. AEBIOM will continue working on this point throughout the trilogue.
  • Harmonisation (26.10): member states will be able to go beyond the defined sustainability criteria (in this case the parliament voted to return to the text in the original commission proposal).
EED
  • Target: The target for energy efficiency is set at a minimum of 35 per cent, binding at national level.
  • Article 7. This article establishes the energy efficiency obligation scheme:
    • For after 2020, distributors or retailers must achieve energy savings of at least 1.5 per cent
    • Savings must be cumulative and additional
    • For the period post-2020, the flexibilities for MSs in the accountancy of energy savings have been reduced. Only one flexibility remains: allow energy savings achieved in the energy transformation, distribution and transmission sectors, including efficient district heating and cooling infrastructure to be counted towards the amount of energy savings required under article 7. The transport sector, previously excluded from savings efforts, is now included
    • Allowing renewables to count as energy efficiency measure has been deleted
    • In conclusion, the article 7 for after 2020 is more stringent than the current one.
  • Primary Energy Factor (PEF): A PEF of 2.3 only applicable to EED has been voted, compared to a PEF of 2.0 proposed by the European Commission. This shows the parliament is not willing to favour electric solutions over others, as proposed by the European Commission.
Reaction to the EU Parliament's votes by Will Gardiner, chief executive of Drax Group:

“Biomass is playing a vital role in decarbonizing our electricity system, providing sustainable, reliable low carbon power for millions of homes and businesses. We are pleased the EU Parliament has recognized the important part biomass plays and we look forward to the next stage of the legislative process and further progress on the introduction of robust, workable sustainability criteria.”

Gordon Murray is the executive director of the Wood Pellet Association of Canada.

Industry Links

Industry Links

Markets

Markets

Become a Member

Become a Member

Safety

WPAC Safety Committee

The Board of Directors has appointed the Safety Committee to manage the safety objectives of the Wood Pellet Association of Canada ("WPAC"). The Safety Committee works in close cooperation with the BC Forest Safety Council.

Read more...
t

Power Generation

t

Sustainable power

The vast majority of Canadian wood pellets are made from sawmill residuals - sawdust. The rest are made from the residuals from harvesting operations for sawmills and pulp mills, or low-grade timber from forest industry harvest sites that has no other economic value. Think firewood. Read more...

Breathing easier - pellet emissions vs coal

Sustainability should be top of mind for any company that wants to stay in the game in today’s world.

As important a role as Greenhouse Gas (GHG) emissions play, we also need to focus on noxious emissions versus coal.

Read more...

Industry News

t

  • Feds call for proposals to reduce diesel reliance in remote communities

    Feb. 16, 2018 - The federal government is looking to fund projects that will reduce reliance on diesel fuel in rural and remote communities, most of which are Indigenous. Minister of Natural Resources Jim Carr launched a call for proposals today[…]

    Read more...
  • FutureMetrics, Prodesa team up for pellet projects

    Feb. 14, 2018 - Prodesa, the leading company in designing and building complete pellet production plants, and FutureMetrics, the leading consultancy to the pellet sector, are teaming up under a new partnership agreement. Under the agreement, FutureMetrics operations expert, John[…]

    Read more...

The Pellet Advantage

Efficient and Plentiful Production

Wood Pellet Association of Canada members are world leaders in the design and operation of modern pellet plants.

Read more...

Innovating our way to a safer, better product

Wood pellets are a safe, reliable modern fuel. But they are still a fuel, requiring care in producing, shipping and storing.

Read more...

Renewable and sustainable? Energy really can grow on trees.

There is no single energy source capable of solving our dependence on fossil fuels. Instead we need to look to a mix of new fuels, including wood pellets.

Read more...

Argus Wood Pellet Index

US$ per metric tonneArgus Wood Pellet Index